How are OPP Tapes made?
Procurement row materials
There are 7 ways to quickly tear off high temperature tape
by：Gangyuan
2022-12-16
1. Use an eraser
Principle: Rely on rubber to fuse self-adhesive glue.
Method: Use an eraser to wipe it continuously. The place where the glue is at the beginning will turn black, but after a long time of wiping, the glue will gradually fall off.
Strengths: Easy to operate, quick effect Disadvantages: Average effect.
2. Use a hair dryer
Principle: rely on heat to remove stickers.
Method: Use the hot air gear of the hair dryer to blow directly with hot air at a distance of about 10cm from the sticker; after blowing for a while, slowly peel off the sticker while blowing.
Advantages: convenient operation, good effect and quick effect.
Disadvantage: It is not suitable for soft plastics that are not heat-resistant, and high temperatures can easily deform objects.
3. Use edible vinegar
Principle: similar to the compatibility principle.
Method: Dip white vinegar or table vinegar with a dry dishcloth, completely cover the labeled part, and allow it to penetrate thoroughly. After soaking for 15-20 minutes, use a dishcloth to gradually wipe off the edge of the self-adhesive label, and finally soak it in water for a while.
Advantages: Suitable for self-adhesive on tableware such as bowls and chopsticks, non-toxic and harmless.
Disadvantages: Poor decontamination effect.
4. Use cooking oil
Principle: similar to the compatibility principle.
Method: Apply cooking oil evenly on the place where the label is attached, and after 3 to 5 minutes, you can directly and slowly tear it off from the corner of the label by hand, so that there will be no trace of the label.
Advantages: Good decontamination effect on glass, stainless steel and other hard objects.
Disadvantage: The effect of removing other objects' stickers is not good.
5. Use lemon juice
Principle: similar to the compatibility principle.
Method: Squeeze lemon juice on the hands with sticker dirt, and rub it repeatedly to remove the sticker print.
Advantages: It is suitable for removing stickers sticking to hands without causing any damage to the skin.
Disadvantage: The effect of removing other objects' stickers is not good.
6. Use alcohol
Principle: similar to the compatibility principle.
Method: Use a rag soaked in alcohol to soak the part with the self-adhesive label thoroughly, wait for a while, and slowly wipe it from the edge of the self-adhesive label to the middle with an alcohol-soaked rag until all the self-adhesive labels are completely removed until cleared.
Advantages: Good decontamination effect on glass, stainless steel and other hard objects.
Disadvantages: Alcohol is not easy to get, and it will damage the skin of hands to a certain extent.
7. Use essential oil
Principle: similar to the compatibility principle.
Method: Thoroughly infiltrate the area with stickers with essential oil, and wipe off with a dry cloth after 15 minutes. If the dirt is difficult to remove, you can extend the soaking time of the essential oil, and then wipe it hard until it is wiped clean.
Principle: Rely on rubber to fuse self-adhesive glue.
Method: Use an eraser to wipe it continuously. The place where the glue is at the beginning will turn black, but after a long time of wiping, the glue will gradually fall off.
Strengths: Easy to operate, quick effect Disadvantages: Average effect.
2. Use a hair dryer
Principle: rely on heat to remove stickers.
Method: Use the hot air gear of the hair dryer to blow directly with hot air at a distance of about 10cm from the sticker; after blowing for a while, slowly peel off the sticker while blowing.
Advantages: convenient operation, good effect and quick effect.
Disadvantage: It is not suitable for soft plastics that are not heat-resistant, and high temperatures can easily deform objects.
3. Use edible vinegar
Principle: similar to the compatibility principle.
Method: Dip white vinegar or table vinegar with a dry dishcloth, completely cover the labeled part, and allow it to penetrate thoroughly. After soaking for 15-20 minutes, use a dishcloth to gradually wipe off the edge of the self-adhesive label, and finally soak it in water for a while.
Advantages: Suitable for self-adhesive on tableware such as bowls and chopsticks, non-toxic and harmless.
Disadvantages: Poor decontamination effect.
4. Use cooking oil
Principle: similar to the compatibility principle.
Method: Apply cooking oil evenly on the place where the label is attached, and after 3 to 5 minutes, you can directly and slowly tear it off from the corner of the label by hand, so that there will be no trace of the label.
Advantages: Good decontamination effect on glass, stainless steel and other hard objects.
Disadvantage: The effect of removing other objects' stickers is not good.
5. Use lemon juice
Principle: similar to the compatibility principle.
Method: Squeeze lemon juice on the hands with sticker dirt, and rub it repeatedly to remove the sticker print.
Advantages: It is suitable for removing stickers sticking to hands without causing any damage to the skin.
Disadvantage: The effect of removing other objects' stickers is not good.
6. Use alcohol
Principle: similar to the compatibility principle.
Method: Use a rag soaked in alcohol to soak the part with the self-adhesive label thoroughly, wait for a while, and slowly wipe it from the edge of the self-adhesive label to the middle with an alcohol-soaked rag until all the self-adhesive labels are completely removed until cleared.
Advantages: Good decontamination effect on glass, stainless steel and other hard objects.
Disadvantages: Alcohol is not easy to get, and it will damage the skin of hands to a certain extent.
7. Use essential oil
Principle: similar to the compatibility principle.
Method: Thoroughly infiltrate the area with stickers with essential oil, and wipe off with a dry cloth after 15 minutes. If the dirt is difficult to remove, you can extend the soaking time of the essential oil, and then wipe it hard until it is wiped clean.
Custom message
Related Products
