The viscosity of the double-sided printing adhesive tape is not good enough

The viscosity of the double-sided printing adhesive tape is not good enough to do 2019 - 07 - 15 you will find that when using double-sided printing tape, some adhesive tape viscosity is not good enough, meet don't know how to deal with this issue. In today's content, the adhesive tape factory for your detailed introduction, how to increase the viscosity of the adhesive tape. In view of the small area of the adhesive material, as has arrived in good bonding effect, should be on tape and the bonding surface must be pressure, adhesive tape and the surface touch fully, it is recommended to use scraper and/or roller. And large-area, span longer adhesive content to reach good bonding effect, it is necessary for adhesive tape and the bonding surface must be pressure, make tape with adhesive surface touch fully, and heavy flat pressure to increase the adhesive tape and the bonding surfaces touch. Tape with the paste content is necessary to ensure full touch and stick to the surface is smooth and flat, is to increase the important condition of double-sided tape sticky.