Q: the performance of the adhesive tape under the environment of high temperature and low temperature will be how to change?
Foam tape answer: when the temperature rises, the rubber and foam will become soft, adhesive strength will reduce, but this is better.
As the temperature falls, the tape will harden and bond strength increase but this variation.
Tape performance back to the original value as the temperature returned to normal.
Q: after the parts paste, how to remove the parts?
Foam tape answer: generally speaking, this is very difficult, unless within a very short time after post.
Should be removed before infiltration components softening of glue, soften hard off or foam cut it open with a knife or other tools.
The residue can be used 3 m foam and glue special cleaner or other solvents to clean easily.
Q: whether can after tape bonding, you have to paste again?
Foam tape answer: if the components are just using the light point pressure, can after have to paste again.
But if all compaction, it is difficult to remove the, rubber may be stained, need to change the tape.
If it is a long time after parts stick, harder to remove the, often to replace the entire unit.
Q: how long can get rid of segregation paper before stick tape?
Foam tape a: air will have little impact on the glue, but the dust in the air contamination of surface, thus reducing sex tape.
So the glue in air exposure time as short as possible.
We recommend that you immediately after removing isolation paper tape.