Double sided tape to remove small coup - 2018
09 double-sided adhesive in our daily life and work is one of indispensable tool, everybody should know how to use, but how to remove double-sided adhesive is a difficult problem, many users today tape factory to give you a few tips.
Prepare tools: 1.
Blade, ordinary pen knife, pay attention to don't need a knife.
For special occasions may also need a razor blade.
Hair dryer, the most important tools, as well as the most core method of a complete set of tools.
Need to pay attention to, hair dryer is heating, must be able to blow more hot wind, ordinary hair dryer may not line, the older the better.
A carefully, do such a job is actually very simple, it is important that must be careful, can succeed.
Sticky material: 1.
The adhesive tape on the glossy paper packaging.
This paste adhesive tape paper boxes.
Computer accessories or cell phone to often the vulnerable tags.
Opened after there will be a part of colloid character of various anti-counterfeiting labels.
Stick to the very thin plastic film on the adhesive tape or stick.
Specific removal method of double side adhesive tape: the first kind of circumstance is the most easy to handle.
Begins with a blade shaving, tore down slowly by hand.
If too slow, can use hair dryer slightly heating.
The second case, especially the patterns are printed on the tape.
Heating hair drier with a computer, can open to the weak windshield, begins with a blade shaving, focus on the heating tape on the back, be careful not to overly heated, it will blow the tape deformation.
Slow off with the hand, the whole process must be careful.
The sort of patterned adhesive tape, will remain more or less a little trace, be careful not to overly heated, otherwise, will remain more.
A little secrets: the faster, the less residual, but also the more likely it is to tear the carton.
Specific effect, which may be related to many ways.
Most of the cases, still can let a person satisfied, such as seal again, not carefully check, it is not easy to find.
The third kind of circumstance can directly use the blade scrape down slowly, in some cases may need to be more thin blade, at this time, can use a razor blade.
If label is larger, can use hair dryer auxiliary heating.
The fourth kind of circumstance can use the blade over the edge, use hair dryer to heat, the whole label start slowly.
When handling this kind of label, carelessly, will leave traces of residue.
The fifth kind of situation general heating must not, because will give blow to the deformation of the plastic film also.
Method is very simple: by hand directly, do not slowly, must be fast, such as the label is bigger, can be divided into several times, suddenly, quickly tore down by hand.
Deal with this situation, the environment temperature is lower, the better.