Matters needing attention when using foam tape
The base material of the foam tape is made of EVA or PE foam as the base material, and then coated with high-efficiency high-temperature resistant oily acrylic adhesive on both sides of the base material. This product has a strong sealing and shock absorption function, and is widely used in automobiles, wall decorations, pasting nameplates and signs, and can also be used for noise reduction and shock absorption. The details that should be paid attention to when using foam tape are as follows: 1. Before pasting with foam tape, the dust and oil stains on the surface of the adhered object should be removed, and the surface of the adhered object should be kept dry (do not wet the wall in continuous rainy days) paste in the case of ). For example, if it is used to paste the mirror surface, use alcohol to clean the adhesive surface first, and then paste it after the surface of the adhesive is completely dry. 2. When using foam tape, the ambient working temperature should not be lower than 10°C. If it is lower than this temperature, you can use a hair dryer to properly heat the adhesive tape and the pasting surface, so as to better exert the pasting characteristics of the foam tape. 3. When pasting heavy objects with foam tape, it is necessary to pay attention to: when pasting, press or compress the foam tape as much as possible, or lay it flat for 24 hours. If there is no such condition, within 24 hours of vertical adhesion, support the load-bearing object.